AVAILABLE
FROM
SLEEPY HOLLOW CHIMNEY SUPPLY
& AUTHORIZED DISTRIBUTORS |
| |
|
|
|
|
| |
|
|
|
|
|
|
|
We are proud to offer a much needed
product to serious flue relining companies. Our Super
Winch® enables you to install a
Super Flex® flexible liner from the bottom up.
Completing virtually any flexible stainless steel reline
that permits bottom access, regardless of diameter or
length
requires:
A complete selection of Heavy-duty Nose Cones designed
to pass through our top plates. Round and oval sizes are
available.
When Super Flex® is pulled up through a flue it seeks
the center, avoiding the “digging into a side wall
effect” that occurs from top/down installations. The
Super Winch® can also be used to pull a liner downward.
This is very helpful in a tight clearance installation.
Super Flex® will conform to the flue interior as it is
winched through.
NOTE: Do not attempt
this with all
corrugated flue liners, as they will rip
apart even with moderate pressure. |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
Five Easy Steps to
Transform
your liner Installation: |
|
FEATURES:
• Aluminum construction for strength, yet
weighs only 17 lbs.
• Built-in leg levelers for uneven crown
surfaces, as well as integral mounting blocks with holes
for plank mounting to accommodate any size chimney.
• 1,000 lb. winch and cable capacities, featuring
forward and reverse ratcheting with built-in brake.
• Stainless steel ratchet spring.
• Grip grooved handle roller.
• Internally lubricated drum bushing.
• Heated treated, zinc plated, hi-carbon steel pinion
gear. |
|
1) Position the Super Winch and one
person at the chimney top.
2) Lower the cable down.
3) Connect the Super Winch® cable to
our installed Nose Cone and Loop.
4) Crank the Super Flex® up through the chimney, and
through our die formed Top Support Plate.
5) Put on the Support Clamp and
disconnect the Nose Cone.
6) You are FINISHED!!! |
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| |
|
|
|
|
|
 |
